|
Name
|
Description |
|
Division |
Brand |
|
High Voltage Surge Protector
|
This provides spike voltage protection. The module detects continuous over-voltage of the input supply and disconnects the output from the input when the input exceeds a certain preset limit.
|
|
Instrumentation
|
Autosave
|
|
Pro-Active Auto-Monitor & R.S.I.
|
The two systems together monitor six critical engine functions: oil pressure, water temperature, water level, engine revs, road speed and idling. This offers the fleet manager an onboard system that keeps vehicle operation and driver performance within pre-determined parameters. Automonitor is for petrol or diesel applications and RSI is for diesel applications only.
|
|
Instrumentation
|
Autosave
|
|
Road Speed Limiter
|
This system prevents the vehicle from exceeding the preset speed limit. For all types of vehicles.
|
|
Instrumentation
|
VDO
|
|
Speed - RPM - Idling Limiter
|
This system monitors engine revolutions, road speed and idling. The RSI enables the fleet manager to preset maximum revolutions, vehicle speed and idling time on vehicles and prevent these limits from being exceeded. The systems reduces engine abuse, extends the life of the vehicle and saves costs. For diesel engines only.
|
|
Instrumentation
|
Autosave
|
|
Speed - RPM Alert
|
This is an alarm which alerts the vehicle driver if a pre-defined rev limit is exceeded. For cars, trucks and buses.
|
|
Instrumentation
|
Autosave
|
|
Starter Motor Protector
|
This device prevents damage to the starter motor during low voltage operation. Starter motor operation is inhibited while the engine is running. For all vehicle types.
|
|
Instrumentation
|
Autosave
|
|
Tachograph Diagram Charts
|
Charts for fecording road speed and engine speed over 24 hours and up to 8 x 24 hours.
|
|
Instrumentation
|
VDO
|
|
Tachograph Installation Accessories
|
Accessories include speed pulse generators, electronic interface units, power looms and sealing equipment.
|
|
Instrumentation
|
VDO
|
|
Tachograph Tools - Service Diagnostics
|
Calibration and programming equipment for all eletronic tachographs as well as diagram chart analysis equipment.
|
|
Instrumentation
|
VDO
|
|
Tachographs MTCO 1390 Series
|
This modular tachograph allows observation of road speed, distance travelled. There are versions with tachograph charts of one day and chart bundles for up to 8 days.
|
|
Instrumentation
|
VDO
|
|
Tachographs TCO 1318 Series
|
This is a tachograph with a compact design and microprocessor-controlled processing of measured values and analog recording. It provides data for both driver and fleet as part of an integrated information system.
|
|
Instrumentation
|
VDO
|
|
Tilt Switch
|
If a vehicle overturns, the tilt switch will automatically switch the engine off to prevent further possible damage. The tilt switch can also provide an input signal to an on-board computer system and other stand-alone systems.
|
|
Instrumentation
|
Autosave
|
|
Turbo Timer
|
This system protects the turbocharger from excessive heat and possible subsequent damage when the engine is switched off. It allows the engine to run for two minutes to cool the turbocharger at idling RPM and then switches the engine off automatically. It can be intsalled in cars, MPVs, trucks and buses.
|
|
Instrumentation
|
Autosave
|